1-866-494-4610

Maxitrol 325-5A-1 Lever Acting Design Regulator 1"

Maxitrol 325-5A-1 Lever Acting Design Regulator 1"
Images for general purposes only. Actual may be different than depicted.
Maxitrol 325-5A-1 Lever Acting Design Regulator 1"

Maxitrol 325-5A-1 Lever Acting Design Regulator 1"

SKU: 325-5A-1
Rating:
* This Product is Now Obsolete
0
0
0
0

When vented to the outdoors the 325 Series is suitable for multi-poise mounting. When using the vent limiting device, the regulator (325-3, 325-5A) must be mounted in a horizontal upright position. Install the regulator properly with gas flowing as indicated by the arrow on the casting.

Features:

  • Designed for multi-poise mounting Self-aligning valve with lever action for dead end lockup Durable, corrosion-resistant construction.
  • High performance type for pounds to inches reduction.
  • Available in six pipe sizes from 3/8" to 1-1/2".

Benefits:

  • Ease of installation Longer life, less maintenance
  • May be used for both 2 psi and 5 psi corrugated stainless steel tubing (CSST) systems
  • Precise regulation from pilot flows to ful regulator capacity
  • Meets many utility

Specifications:

  • Gases: Natural, manufactured, mixed, liquified petroleum or LP gas-air mixture. 325-3: 3/8'' & 1/2'' NPT, ANSI Z21.18
  • Certified Appliance Regulator to 5-psi or Non-certified to 10-psi 325-5A: 1/2'' , 3/4'' & 1'' NPT, ANSI Z21.18
  • Certified Appliance Regulator to 5-psi or Non-certified to 10-psi 325-7: 1-1/4'' & 1-1/2'' NPT, Non-certified to 10-psi
     

Following are the Attached files for this product:

Maxitrol 325-5A-1 Submittal Sheet

Q & A: Ask the Questions, share answers

Do you have questions about this product?