1-866-494-4610

Maxitrol RV53-34, 3/4" NPT - Straight Through Flow Regulators

Maxitrol RV53-34, 3/4" NPT - Straight Through Flow Regulators
Images for general purposes only. Actual may be different than depicted.
Maxitrol RV53-34, 3/4" NPT - Straight Through Flow Regulators

Maxitrol RV53-34, 3/4" NPT - Straight Through Flow Regulators

SKU: RV53-3/4
In Stock 40
Rating:
$69.32 /ea
Qty of 15 - $64.32 /ea
Qty of 25 - $59.32 /ea
0
$0.00
0
$0.00
0

These regulators are main burner only, non-lockup type. They should not be used as a line gas pressure regulator ahead of low pressure controls. Use only where downstream controls can operate at line pressure.
The RV52, RV53, & RV61 are suitable for multipurpose mounting. The RV81, RV91, RV111, & RV131 are recommended for normal horizontal position only. Maxitrol's original Straight-Thru-Flow design meets your needs for high capacities at low inlet pressures. The basic difference between Straight-Thru-Flow design and other type regulators lies in the conical valve.
The cone principal permits gas to flow straight through the regulator without changing directions. Frictional flow resistance is reduced, resulting in greater capacity. The improved flow pattern provides accurate sensitive regulation at extremely low pressure differentials. The ability of the regulator to handle large capacity appliances with limited supply pressure offers a definite advantage to designers of commercial and industrial gas-fired equipment.
Straight-Thru-Flow appliance regulators are intended for use with all fuel gases, and may also be used with air or other noncorrosive gases within their pressure limits.

Following are the Attached files for this product:

Maxitrol RV53-34, 3/4" NPT Technical Sheet

Q & A: Ask the Questions, share answers

Do you have questions about this product?